Customization: | Available |
---|---|
After-sales Service: | Online and User Factory |
Warranty: | 12 Moths |
Still deciding? Get samples of US$ 140/Set
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payment in USD |
Secure payments: | Every payment you make at Made-in-china.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
CON4 pins | Name | function |
4, 5 | VCC | +5V power supply. |
12,13 | GND | Reference ground of the power supply. |
Pin | Name | Function |
1,9 | CLK- / CLK+ | Clock signal- / Clock signal+ |
2,10 | SYNC- / SYNC+ | Synchronization signal - / Synchronization signal+ |
3,11 | X Channel- / X Channel+ | Scan head signal X- / Scan head signal X+ |
4,12 | Y Channel- / Y Channel+ | Scan head signal Y- / Scan head signal Y+ |
5,13 | Z Channel- / Z Channel+ | Scan head signal Z- / Scan head signal Z+ |
6,14, | Status-/Status+ | Reserved |
7 | NULL | Reserved |
8,15 | GND | Reference signal |
Pin No. | Signal | Illustration |
1--8 | P0--P7 | Laser power signal.TTL compatible |
9 | PLATCH | Power signal latch. TTL compatible. |
10, 14, | GND | The reference ground of the control board. |
11,12,16,21 | LASERST0~3 | Alarm signal of Laser module |
17 | VCC | 5V power output. |
18 | MO | Main oscillator signal. TTL compatible. |
19 | AP | Power amplifier signal. TTL compatible. |
20 | PRR | Pulse repetitive rate signal. TTL compatible. |
22 | RedPt | Red light pointer signal. TTL compatible. |
23 | EMSTOP | Emergency stop signal. TTL compatible. |
13, 24, 25 | Unconnected. |
Pin | Name | function | |
1 | IN8 | Input port 8 | Form a closed circuit with GND |
2,6 |
IN9+,IN9- |
Input port 9 |
With a 1K resistor built in. if the input signal is over 12V, an external resister is recommended. |
3,7 | BCODEP/ BCODEN | Encoder input B+/B- | |
4,5 | ACODEP/ACODEN | Encoder inputA+/A- | |
8 |
VCC |
+5V output |
This is a power supply for external device. DO NOT CONNECT POWER SUPPLY HERE OR SHORT IT WITH GND. OTHERWISE IT WILL CAUSE DAMANGE OF THE BOARD. |
9 | GND | Reference ground |
Pin | NAME | Function |
1 |
XORG0 |
The home signal of extension axis X. To use this pin just connect it and GND to a switch. In software In14 represents this pin. |
2 | GIN15 | General input in15, using GND as a reference ground. |
2,10 | OUT4, OUT5 | General Output Out 4-Out 5, using GND as reference ground. They are all TTL output . |
4,5 | Vin | Input pin for 5V power supply. |
11,12,13 | Gnd | Reference ground of 5V power supply |
14 |
XDIR+ |
Direction signal of extension axis X. It is a TTL output. For common anode, use VCC and XDIR+ signals, and VCC is anode signal. |
15 |
XPUL+- |
Pulse signal of extension axis X. It is a TTL output. For common anode, use VCC and XDIR+ signals, and VCC is anode signal. |
8 |
ReMark |
Repeat marking signal. Use GND as a reference ground, to use this signal just connect a switch between this pin and GND. When it is activated the control will mark the content in the cache. |
pin | name | function |
1,2,4, | Out0--7 | General Output Out 0 - Out 7, using GND as reference ground. They are all TTL output by default. Out 4-Out 7 can be configured to perform as a OC out put by jumper JP8-11. |
5,14,15, | ||
16,17 | ||
3 |
COM
|
OC output, connect it to plus end of the pull power(for example 24V), in case of the output circuit will be wracked by inductiveload(for example: inductive relay) |
18 | LaserErr | OC output, if there is output, means laser has problem, then this signal will be pull to GND. |
6,7,8,19,20 | GND | Reference ground of control board. |
21 | INRTN1 | Minus input of general input 10/11 |
9,22 | GIN10,GIN11 | Plus input of general input 10/11, make up return circuit with INRTN1. |
10 | INRTN2 | Minus input of general input 12/13 |
23,11 | GIN12,GIN13 | Plus input of general input 12/13, make up return circuit with INRTN2. |
12,13,24,25 | Gin4--7 | General input in4-in7, using GND as a reference ground. |
A. Question: What kind of our company is CCILASER?
Re: CCI is laser marking machines, laser welding machines, laser marking machines manufacturing expert since year 2002.
B. Question: How is JPT laser source guarantee?
Re: b1. JPT laser source warrenty period is 24 months after BL time;
b2.12 hours technical support feedback;
b3. Own machining factory, which can control the spare parts quality at high quality;
b4. Own accessories warehouse and user can enjoy the agent price.
C.Question: How is delivery time?
Re: We can delivery the machines within 7 days if we have the machines in stock.
The common machine fabricating time is 15-25 days and CNC machine fabricating time is about 25-50 days.If you have customized products, the delivery time will be given after confirmation.
D. Question: How is payment?
Re: 50% of amount as deposit and the balance should be paid by T/T or LC at sight before seller delivery the machines to loading port.
E.Question: How is our package?
Re: Wooden Pallet/ Wooden Case. In order to ensure high quality products precision, the perfect package is necessary.
F. Question: Why is price higher than other supplier?
Re: f1. We have our own machining factory and the high quality technical quality is our aim;
f2. All the electric parts and pneumatic parts are high quality. Most of them are imported from european and american market;
f3. Most of fabricating worker has more than 10 years working time. Their fabricating work is professional and salary is higher;
f4. Our warrenty period is 24 months after BL time. It can support the new comer client going well in the beginning time.
Delivery Procedure